Centrifuge model Consul 22 R

High capacity centrifuges

A great refrigerated centrifuge, compact, high capacity and with the advantages of equipment in superior segments. Its TFT colour touch screen, provides the user with features that enable, in addition to the control of the equipment by operating parameters, the possibility to export the data for subsequent analysis and programming for future operations. As the rest of Ortoalresa centrifuges, it’s designed to be versatile, therefore it has swing out rotors with volumes of 400 ml. per bucket, rotors for microplates of 80 mm height, angle fixed rotors for high speed and microtubes as well as a wide range of adaptors for all of them.

The autonomy that this equipment gives to the user optimises the laboratory routine by the personalization of the work cycles. These particularities also ensure process traceability and that no parameter is uncontrolled. Its refrigeration system allows it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

หมวดหมู่: ป้ายกำกับ: , Brand:

คำอธิบาย

Feature:

  • Max capacity: 4 x 400 ml
  • Display type: TFT
  • Max speed: 14,300 rpm/21,948 xg
  • Refrigerated:
    • Precooling program with rotor spinning and selectable temperature.
    • Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C steps.
    • Gas R 449A HFO (CFC free).
  • TFT color touch Screen:
    • Shows RPM and RCF, time and acceleration/deceleration values (PCBS)
    • Speed programming in 10 RPM/10 xg steps.
    • Real RCF values on screen based on accessories configuration.
    • Count up/down from “0” or at “set RPM/RCF” for reproducible tests.
    • Timer from 1 sec. to 99 hours programmable in 1 sec. steps and hold position.
    • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
    • Start delay: To program the time at which the cycle is to begin.
    • Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
    • 100 programmable memories, with protection under password.
    • Several acoustic and visual messages showing the situation of the device to the user.
  • Easy to use:
    • Microprocessor controlled. Connectivity.
    • Induction motor maintenance free (brushless).
    • Rotors and adapters list in memory.
    • Noise level: below 60 dB.
    • Start, stop, open lid and short spin with adjustable speed buttons.
    • Possibility to block or modify the speed during the cycle.
    • Automatic lid opening, programmable.
    • Last values remain in memory.
    • Automatic rotor recognition. Over-speed protection.
  • Safety:
    • Lid provided with security systems:
      – Automatic lid lock system, motorized.
      – Emergency lid-lock release.
      – Locking and protection against opening along the run.
      – Lid dropping protection.
      – Port in the lid for calibration and operation checking.
    • Ergonomic design that allows close the lid effortless.
    • Unbalance detection and switch off.
    • Protection safety ring between the centrifugation chamber and the housing.
    • Chamber of centrifugation in stainless steel (easy cleaning).
    • Rotors can be removed with the lid closed.
    • Rotors and adapters autoclavable, easy to install by the user.
    • Automatic disconnection for energy saving up to 8 h.
  • Orto Alresa, Spain

Download Catalogue

สินค้าที่เกี่ยวข้อง